IGP Engineers Infrastructure

IGP Engineers is spread over two world class manufacturing facilities. The company's state of the art infrastructure facility has been equipped with modern technologies to provide top notch quality products. Our in house design unit and manufacturing unit ensure the products are made in compliance with international standards.

1) The IGP Main Factory is situated at Kottivakkam, which is the hub of industrial development in Chennai. It has four separate blocks dedicated to different activities.

The Facility is spread over a total area of 1,20,000 sqft unit divided into four separate blocks dedicated to different activities.

1. Heritage Block

This houses the Shop Floor where the activities include the Lathe Shop, Bending & Welding and Grinding.

2. Central Stores

The Stores are a proof to our guarantee of readily available materials. Raw Materials Store has both Exotic Materials and Alloy Material. There is also a separate Shearing Shop.

3. Manufacturing I

The manufacturing facilities in the block is spread over three levels:

  • This houses the Quality Control Department & Production Control Department.
  • This is the store for the Rings, Slitted Steel & Non- Asbestos Materials.
  • The Production of Spiral Wound Gaskets for Exports happens here. 50 machines are in operation. We have a separate bundling and dispatch section here.
4. Manufacturing II

The three levels in this block is utilized for the domestic production:

  • This has the Domestic Packing Section and Heat Exchanger Gasket Division.
  • The Domestic Spiral Wound Gaskets (from 14” and upwards) is manufactured.
  • The Domestic Spiral Wound Gaskets (from 0.5” to 12”) is manufactured.
  • The activities here include Soft Cut Gasket made of Non-Asbestos Material and Bending & welding section for Non–Std gaskets.

2) The IGP Unit 2 is situated at Kizhur Village, 10 kms from Thiruporur, Chennai.

Five different products are manufactured in this facility. The products are:
  • 1. Solid Metal Gaskets
  • 2. Ring Type Joint Gaskets
  • 3. CS Rings for Spiral Wound gaskets
  • 4. Kammprofile Gaskets
  • 5. Monolithic Insulation Joints

The total construction area in 1,40,000 Sq Ft. There is another 8 acres available for future developments.

It consists of 9 – 2 storey building Blocks. Each block is allotted for a specific function.

There are 13 CNC machines which are operational. This has enabled us to maintain the standard for the ring joints.

Availability of Press Shop with 50 to 300 tonne capacity presses.


There is in- house facility for Electro Plating & Epoxy coating. The discharge from these processes is Treated in an eco-friendly way by the effluent treatment plant.

A separate stores with all the exotic and rare materials is available.

The main Operations include:

  • Gas cutting
  • Pillet Cutting
  • Rough Machining
  • Final Machining in CNC M/c
  • ID Punching
  • Plating or PTFE Coating
  • Packing

The Production processes available for manufacturing the Rings include:

  • Shearing
  • Blanking
  • Grooving Outer ring
  • Forming Inner Ring
  • Plating or Epoxy Coating
  • Bending & Welding
  • Plasma cutting
  • Non std Rings

The Insulation Joints facility is independent from the rest. The NDT, machining process and Sandblasting are in-house and this would help to save time.

IGP Group of Companies