ABOUT THE PRODUCT

In any process or power industry, where steam or fluid is used, it is advisable to monitor steam or fluid parameters like conductivity, pH, Silica, Sodium, dissolved. Oxygen and Hydrazine, to ensure that the right quality of steam or fluid enters the downstream equipment which is normally very expensive.

Taking out samples from high temperature zones at various desired temperature level for measuring the above properties of steam or fluid, Valqua Products is supplying Sample Coolers with the standards established by BIS, ASME etc. Sample Coolers bring down the temperature of steam or hotwater or fluid to a level that is compatible with the sensor being used.

WORKING PRINCIPLE

Sample Cooler is a heat exchanger that condenses/sub cools the steam or cools incoming hot water or fluid by passing it through a helical coil housed in a cylindrical shell. In order to bring down the temperature, heat has to be extracted from the steam or fluid.

The Sample Cooler does this by circulating cool water over the coil (in the shell), which takes up the heat given off by the steam or fluid. The amount of heat to be extracted from the steam or fluid depends on the condition of the incoming steam. Normally the amount of heat to be extracted is ranging from 8000 kcal/h to 48000 kcal/h. In the process of heat exchange the cooling water gets heated by 10 15 Degree C.