IGP -Flange Insulation Kit Gasket

Contact Us

FeedBack

FLANGE INSULATION KIT GASKET

IGP PRODUCTS

Millions of our gaskets are successfu-
lly being used in a wide variety of
countries around the world...
MORE..

INSAPLEX manufactures FABRIC EXPANSION JOINTS 
used in flue Gas Ducts, Process Gas etc, 
for accommodating movements at medium 
to high temperature conditions...
MORE..

Arudra Standard Construction pulleys
are provided with Steel diaphragms
(End Discs) welded with shell..MORE..

Cooling water sources cause different
tube fouling problems that affect heat
transfer and life expectancy of Heat
Exchanger and Condenser Tubing
..MORE..

Range includes rubber liners, wiper
rubbers, skirt rubber liners, belt
repair cover compounds, abrasion &
corrosion protection rubber sheets
and general purpose rubber sheets.
..MORE..

OE supplier for mainly earth moving
machinery, drilling rigs, machine
tools and compressor manufacturers
..MORE..

We specialise in the manufacture of
plastic injection moulded components
..MORE..

LONESTAR INDUSTRIES, a leading
Engineering Organization based at
Chennai, India...MORE..

	Group Of Companies

	IGP ENGINEERS
	ARUDRA ENGINEERS
	ARUCHEM
	CORI ENGINEERS
	INSAP ENGINEERS
	VP ENGINEERS
	INSAPLEX
	LONESTAR INDUSTRIES

Introduction
"Spiraget^®" Range: Insulation Kit Gasket
"Spiraget^®" Insulation Gaskets for Type "F" Raised Face Flanges
"Spiraget^®" Insulation Gaskets Type "E" for Full Face Flanges
"Spiraget^®" Insulation Gaskets Type "D" for Ring Gaskets

Introduction

"Spiraget^®" Flange Insulation Kit Gaskets are designed to combat the effects of corrosion often found in flanged pipe system. Galvanic corrosion between dissimilar metal flanges, flange insulation associated with cathodic protection of underground piping are other examples where "Spiraget^®" flange insulation Kit Gasket can be put to effective use.

The Design and selection of materials used in "Spiraget^®" Flange Insulation Kit Gasket, meet the twin purpose of sealing the flanged s and insulation metal parts to prevent flow currents responsible for corrosion.

"Spiraget^®" Range: Insulation Kit Gasket

Currently, we design, manufacture & supply Flange Insulating Kit Gasket in three types, TYPE-E for full face flanges, TYPE-F for raised face flanges and TYPE-D gaskets specifically designed to fit into the grooves of RTJ Flanges. Our "Spiraget^®" Flange Insulation Kit Gasket will comprise of:

For Type "E" and type "F"

One central gasket of suitable thickness in flat section.
One full length insulating sleeve per bolt / Integral Washer Sleeve
Two insulating washers per bolt.
Two metallic washer electro plated

Given below are details regarding choice of materials of construction :

	Insulation Gasket	Insulation Sleeve	Insulation Washer	Plated Washer
Standard	Neoprene faced Phenolic	Reinforced Phenolic	Reinforced Phenolic	Electro platedsteel washer
Special	Neoprene faced Phenolic	Nylon	Nylon	-do-
	-do-	Mineral filledNylon	Mineral filled Nylon	-do-
	-do-	Polyethylene	Polyethylene	-do-
	Glass Reinforced Epoxy (G-10)	Glass Reinforced Epoxy (G-10)	Glass ReinforcedEpoxy (G-10)	-do-

Properties of materials used in Flange Insulation Gaskets kits

Material	Dilectric StrengthVolts / MIL	WaterAbsorption (%)	Max.Cont. OperatingTemp. (Deg.C.)
Polythylene	450	0.01	41
Phenolic	400-500	1.1	107
Nylon	500	1.5	110

"Spiraget^®" Insulation Gaskets for Type "F" Raised Face Flanges

Available for use in ANSI B16.5, API, BS & DIN Standard

In this type, the central gasket is designed to be located inside the flange bolt circle and sits fully on the raised face porting of the flange. This type of gaskets will be supplied in all the materials shown in Table

"Spiraget^®" Insulation Gaskets Type "E" for Full Face Flanges

Available for use in ANSI B16.5, API, BS & DIN Standard

In this type, the central gasket has its outside diameter as equal to that of flange outside diameter and precision cut bolt holes. This design helps easy alignment of the gaskets during installation. Type "E" gaskets are available in Neoprene faced reinforced phenolic material or other materials in Table.

"Spiraget^®" Insulation Gaskets Type "D" for Ring Gaskets

Available for use in ANSI B16.5, API, BS & DIN Standard
In this type the gaskets available in fabric reinforced Phenolic. Available in basic "oval & octagonal" type. This type has the contact faces with oval shape. It provides a high reliability seal. These gaskets comply with ASME B - 16.20.

IGP is a pioneer in the field of design & development of static seals for industrial application. We offer wide variety of sealing products of Oil Refineries, Chemical & Process Plants, Thermal & Atomic Power Stations and Fertilizer Plants, a brief list of which are given below:

      "Spiraget^®" spiral wounded metallic gaskets with and without rings -          available in a wide variety of filler materials.

      "Spiraget^®" Jacketed Gaskets.

      "Spiraget^®" Non-Metallic Gaskets made of compressed asbestos fibre          or rubber, teflon and other special fibre materials, eg. ARAMIDE.

      "Spiraget^®" Ring Joing Gaskets in soft iron, SS-304, SS-316, 4 TO          6% Chrome % Moly etc.

      "Spiraget^®" Camprofile Gaskets.

Our modern engineering facilities including computer aided design and the state of art manufacturing facilities located near Chennai, ensure that our customers' requirement are met promptly with quality products. Our research and development facilities a well equipped laboratory and testing facilities enable field simulation tests, leading to more reliable and better engineered product.

IGP is an ISO 9002 Company with a strong presence in exports. Our Ring Gaskets are API approved and carry the API monogram

When Ordering Please specify

          Gasket Style

          Flange standard

          Nominal pipe size

          Pressure & Temperature of Service

          Preferred material of construction.