Anti Vibration Mounts
 
   
 
 
CORIRUBBER ® - 501/502 SANDWICH MOUNTS
 
These are available in two different sizes. The smaller size has a stud on one side while the larger one has no stud. Two numbers of these mounts are used as the rubber springs in each of the quickfoot CORIRUBBER ® - 503 mountings These can be loaded either in compression or in shear and withstand loads upto 1000kg in compression and upto 200 kg in shear.
 
CORIRUBBER ® - 503A/503B HOUSED SANDWICH MOUNTS
 
A time tested mount for isolating vibration from diesel generators, compressors, screens, blowers and other medium to heavy machines. These quickfoot mounts can absorb a combination of shear & compression loading. Installation can be made for most machines without bolting to the floor by using oil resistant friction pad supplied with the mount.
 
Load Range : 500 kg to 1600 kg.
 
CORIRUBBER ®- 504/505/509A/517/523/609/611/612/622 CYLINDRICAL STUD MOUNTS :
 
Low cost Mounting arrangement which are easy to install either in compression or in shear. They come in different sizes with studs on both ends
 
Load Range: 4 kg to 2500 kg.
 
 
CORIRUBBER ® - 506/507/610/626 CYLINDRICAL STUD-FEMALE MOUNTS
 
These are mounts similar to cylindrical stud mounts but come with stud on one end and threaded insert on the other or threaded inserts at both ends.
 
Load Range: 10 kg to 2500 kg.
 
CORIRUBBER ® - 508A/508B/508C/508D/508BI/508CI FLUSH TYPE ELLIPTICAL MOUNTS
 
These mounts have threaded inserts at the top and have an elliptical base with metal reinforcement. They can be supplied in synthetic rubber such as neoprene* or nitrile, depending on the service conditions. It is used for generator sets as well as air handling units such as blowers, axial and centrifugal fans. Ribbed mounting base provide a non-skid Surface. Mounts without rib at the top and bottom are also available with same load characteristics.
 
Load Range: Upto 1000 kg.
 
* Trademark of Dupont
 
 
CORIRUBBER ® - 509/623 CONTROL PANEL MOUNTS
 
These are similar to cylindrical mountings except for the concave rubber profile which permits greater deflection for a given load. These are used to protect sensitive electrical / electronic instruments / fittings from low frequency external vibrations. The bolts on either end promote easy installation.
 
 
 
CORIRUBBER ® - 514/515 CROSS RIB MOUNTING PAD
 
These pads are used for sound suppression and are laid directly under the machines. These provide low deflection and are used in conjunction with other mountings. These are available with or without cork inserts.
 
 
CORIRUBBER ® - 521/522/526 LARGE DEFLECTION MOUNTS
 
These mounts provide large deflections, high load capacity and a long service life. They should be given first consideration for isolating vibration from diesel generators and most medium weight to heavy machines and for protecting precision machinery and heavy electric / electronic installations from external vibration.
 
 
CORIRUBBER ® - 530/603 MACHINE MOUNTS
 
These machine mounts absorb shocks and impacts from punching machines and presses, also the horizontal forces from injection moulding machines and shaping machines. Lathes, grinding machines and other precision machines are protected from external shock loads and vibration.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
CORI ENGINEERS PVT LTD
No 2, Type II, VSI Estate, Rajiv Gandhi Salai (OMR),
Thiruvanmiyur, Chennai - 600041
 
Ph: +91-44-42897500, 22542426
Fax: +91-44-42897505
 
Email: cori@vsnl.com , Website: www.igp-group.com
               
   
               
     
Home | About us | Contact us | Products | Certification | Gallery | Site map